Yamaha CG-TA TransAcoustic Nylon String Acoustic-Electric Classical Guitar Natural Bundle with Guitar Bag, Guitar Stand, and Accessories

The Yamaha CG-TA TransAcoustic Nylon String Acoustic-Electric Classical Guitar (Natural) offers traditional acoustic tones and internally amplified effects for guitarists at home, on stage, or in the studio. Its System 70 TransAcoustic electronics allow use of built-in reverb and chorus without external amplification by employing the guitar's resonance to project the effects. An integrated SRT piezo pickup feeds the 1/4" output for easy hookup to an amplifier or audio interface/mixer.

The Yamaha CG-TA TransAcoustic Nylon String Acoustic-Electric Classical Guitar (Natural) back and sides are constructed from ovangkol, while the top is solid Engelmann spruce. The nato neck is capped with a 21-fret rosewood fingerboard and side dot markers. Controls mounted on the side of the CG-TA provided straightforward access to the line output volume and TransAcoustic settings.

• Classical body with nylon strings
• Solid spruce top
• Ovangkol back and sides
• Rosewood fingerboard and bridge
• Onboard reverb and chorus effects

Yamaha CG-TA TransAcoustic Nylon String Acoustic-Electric Classical Guitar (Natural) - Key Features:

Actuator. An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.

Simple Controls. Three simple knobs let you adjust the amount of effects and the line out volume level. Keeping the controls small minimizes the area of the holes in the body material, which reduces acoustic sound loss.

• Chorus Control
• Reverb Control (Room / Hall)
• TA Switch / Line Out Volume Control

• Pressing the TA Switch for longer than 0.3 seconds activates the TA function.
• When a cable is connected to the line out jack, the line out volume can be adjusted by rotating knob (C).
• The reverb type switches from Room to Hall around the 12:00 position.

Newly-Designed Battery Box. The battery box integrated into the end-pin jack requires fewer holes in the body. This reduces acoustic sound loss. Connect the cable form the jack to a PA or amp to use as an acoustic-electric guitar.